During our tests supporting our design we have made made quite a few installation trials and subsequent functional tests to ensure the response of the unit was insensible to the different possibilities. But certainly we have not covered everything at all. There is a general recommendation to fix GliderKeeper to your model canopy but really only two rules apply:
1.- The long dimension of gliderkeeper must be parallel to flight direction.
2.- It has to be fixed as stiff as possible to fuselage body…
In this picture you can see a very neat lateral installation in a Plus X fuselage body. I challenge our users and fans to share their installation pictures either by sending us a picture and the relevant comments and tips to our e-mail (support@gliderkeeper.com) and we will update this post with them or to just leave a comment with the picture in our Facebook wall!
